Raspberry Pi Pico Breakout Board With Reset Button and Power LED

Raspberry Pi Pico breakout board makes accessing all the GPIO and power pins of the Pico much easier for development work.

The board also incorporates a reset button for the Pico, this avoids pulling out the USB connector and reinserting when you need to upload a UF2 file. Just hold down the bootsel button and press reset button.

• Raspberry Pi Pico Compatible
• Reset button on board
• Power LED 
• 2 x 20 Male Pin Headers for Jumper Wires
• 2 x 20 PCB solder connections.
• All Raspberry Pi Pico Pin identifications marked on breakout board.
• 2 x 20 pin female headers supplied to solder to breakout board if required.
• Board size 53mm x 62mm
• Interface using female jumper cables or male jumpers with supplied female headers soldered
• Easy Pico programming using the on board reset switch.

Note: Raspberry Pi Pico NOT included